A Dallas water damage inspection isn't a walk-through with a flashlight. It's a systematic, instrument-driven assessment that produces a written report showing exactly where the water went, how saturated each affected assembly is, and what needs to happen next.
Here's what makes our Dallas inspection service more than a visual walk-through.
Thermal imaging is non-destructive and covers large surface areas quickly — making it the most efficient way to map water migration in a Dallas property.
Thermal imaging shows probable moisture — calibrated moisture meters confirm it. Our Dallas inspectors use both pin-type meters (direct reading in framing and structural members) and non-penetrating radio-frequency meters (surface reading through drywall and flooring) to take quantified moisture content readings at all thermal-identified locations. These readings are recorded at labeled sensor points and become the data basis for the written inspection report.
A verbal assessment is an opinion. A written report with instrument readings is documentation.
Both use cases are available in Dallas — contact us with your specific situation and our inspector will scope the right assessment.
Here are the specific inspection scenarios and assembly types our Dallas team handles.
Active event inspection is the step that prevents under-scoped remediation and missed hidden damage.
Real estate transactions in Dallas frequently involve properties with prior water events — disclosed and undisclosed. Our pre-purchase inspection uses thermal imaging and moisture meters to identify active moisture in structural assemblies, staining patterns consistent with prior water intrusion, and the condition of previous remediation. For Dallas buyers, this inspection provides either confidence that a disclosed water event was properly handled, or documentation that it was not — giving the buyer negotiating leverage and a clear picture of what additional remediation cost, if any, is warranted.
Post-remediation verification is an independent assessment — not a rubber stamp.
Properties in Dallas that had a water event 48 hours or more before inspection — or where a slow leak went undetected for an extended period — may present mold risk alongside ongoing moisture concerns. Our mold risk assessment inspection identifies the structural conditions that support mold growth: elevated moisture content in organic materials, elevated ambient relative humidity, and the presence of visible mold growth on surface or semi-concealed areas. This assessment determines whether a standard drying-focused remediation is appropriate or whether S520-standard mold remediation protocols need to be incorporated into the project scope.
Below-grade moisture in Dallas properties is underdetected and underlies a significant portion of structural issues discovered later.
Our Dallas inspection reports are formatted to the documentation standards that insurance carriers use to evaluate water damage claims in SD.


Call +1-844-499-0972 and describe your situation — active event, pre-purchase, post-remediation, mold concern, or insurance documentation. Our Dallas scheduler assigns the appropriate inspection type and confirms your appointment. Most Dallas residential inspections are available within 24-48 hours.
Systematic, instrument-driven, fully documented during the on-site session.
After the on-site assessment, your Dallas inspector reviews the key findings with you — which areas are affected, what the readings indicate, what water category applies, and what remediation is indicated. If you have questions about specific readings or want to understand what a particular finding means, this is the conversation for it. The verbal review happens on-site.
Report delivered in the format your use case requires, within 48 hours of inspection.



"We were purchasing a Dallas home where the seller had disclosed a prior basement water event and claimed it was fully remediated. COS Water Damage Restoration's pre-purchase inspection found moisture readings in the wall framing adjacent to the original event area that were significantly above dry standard — indicating incomplete drying. The written report we received gave us specific sensor point readings that we used to negotiate remediation credit from the seller before closing. Without that inspection, we would have closed into a mold problem."
"We used the COS Water Damage Restoration Dallas inspection report to file a homeowner's claim for a water damage event. The adjuster reviewed the thermal image documentation and sensor point readings and approved the full remediation scope on first submission. The inspection report paid for itself many times over by eliminating the supplement process."
"We manage a portfolio of Dallas rental properties and COS Water Damage Restoration's inspection service is what we use every time a water event is reported, prior to any remediation starting. The inspection report maps the damage completely — it's what we give our remediation contractor as the scope of work and what we give our insurer as the damage documentation. Having a consistent, instrument-backed inspection process has eliminated the disputes we used to have about whether remediation was complete or whether the damage scope matched what we claimed."
COS Water Damage Restoration's certified inspection team serves Dallas and surrounding communities throughout SD. Call +1-844-499-0972 to schedule your Dallas inspection.
Visible water damage is easy to find. The moisture behind your walls and under your floors is what causes the mold problem three months later. Call +1-844-499-0972 and our Dallas inspection team brings the instruments to find all of it.
📞 Call +1-844-499-0972 — Schedule Dallas InspectionIICRC Certified · FLIR Thermal Imaging · Written Reports · Dallas, SD